Building on our goal to provide solutions to your conveyor belt problems, ASGCO Manufacturing introduces Razorback with Spray Bar, a secondary belt cleaner that uses a row of spray nozzles to spray a fine sharp stream of water at a 30 degree angle onto the conveyor belt where the carryback material is difficult to remove. Water is applied to the belt in an overlapping spray pattern which places the particles into a fluid suspension, while moistening the belt. The blades of the Razorback with Spray Bar are then able to make consistent contact with the belt surface to remove nearly 98% or more of the coarse carry-back.

• Will lubricate the belt/cleaners interface and require much lighter tensioning.

• Fully adjustable sprays are built into the cleaner enabling installation in the tightest of spaces.

• Performance is improved by a minimum of 75% over similar dry systems and maintenance is reduced because of the lubricating action of the water.

• Fine atomized water from the galvanized spray bar nozzles mixes with any dust generated within the chute, causing the dust to fall from the atmosphere.

• Spray nozzle sizes can be customized for any desired spray pattern and water pressure.

• Stainless steel construction including tungsten carbide tip holder, cushion plates and fasteners.

• Tungsten carbide replaceable tips provide long service life with a high level of resistance to impact damage and/or acid leaching.

     Applications

• High speed and tonnage above ground and underground mining conveyor systems running in the most aggressive environments

• Concentrator / Ball / Mill conveyors where water is available.

• As the secondary cleaner on a single direction conveyor where high levels of performance are demanded.

• Where the material to be removed is particularly sticky.