|
ASGCO Armorite 700 |
|
|
NEW ARMORITE 700™ is an extremely hard, laminated
bi-metallic, wear resistant composite, which has a nominal
hardness of 700 BHN (63Rc) produced by combining a highly
alloyed chromium-molybdenum white iron (to AS 2027 15/3
Cr/Mo) and metallurgically bonding it to a mild thick steel
backing plate. The resultant bond possesses high shear strength
of over 250 Mpa and will not separate. |
 |
- Armorite is a combination of high chromium and
molybdenum white iron metallurgically bonded to a mild steel
plate.
- Armorite provides maximum protection in high wear
areas
- The mild steel backing cushions the white iron enabling
it to withstand impact
- Armorite is easily weldable with minimal
preparation
- Guaranteed to last 5-6 times
longer than AR500
|
Armorite 700 Smooth Wear Liner
|
Armorite Smooth Wear Liners |
- Available in various
thickness from 1/2” to 2”.
- Extreme abrasion resistance
across a range of applications.
- Custom designs to meet
customer requirements.
- Rubber backing available to
reduce noise and vibration.
- Optional Nelson studs
supplied ex works.
- Liner size allows for
localized replacement in high wear areas
- Reduced downtime & reduced
maintenance costs.
|
ASGCO Armorite 700 Wear Liners |
- Lower operating costs
- Longer service when compared
to conventional materials
- Increased production
- Improved product efficiency
- Increased equipment
availability
- Custom made or from standard
range of sizes.
- Metallurgically bonded
achieving a high strength joint between white
iron and steel backing plate.
|
|
Armorite
700
Smooth Wear Liner |
 |
|
|
|
Armorite 700
Skirtboard Wear Liners ASGCO
Armorite Skirt Liners protect your skirtboard and provide
a significantly longer wear life than currently used skirt
liners.
 |
Armorite
700
Skirtboard Wear Liner
|
This
Armorite Skirt Liner has been in service in hard
rock mining for 1 year and has handled 12 million
tons. Previously, AR400 lasted only 6 to 8 weeks in
this same application.
|
-
Provide
a significantly longer wear life than currently used
skirt wear liners.
-
The
skirt wear liner is produced from 20mm thick
Armorite that is enhanced with a 10mm thick mild
steel producing a product that is 700 BHN with a
high impact resistance.
-
For all
conveyors and transfers where the eradication of
spillage or centralization of load is required.
|
|
|
|
|
Armorite 700
Rockbox Wear Liners |
Armorite
700
Rockbox Wear Liners |
- Protection from sliding
abrasion in high wear areas on traditional heavy duty
application
- Creates a rock box effect to
prevent wear as material wears against itself
- Available in four standard
sizes
- Custom designs to meet
customer requirements
- Rubber backing available to
reduce noise and vibration
- Optional Nelson studs
supplied ex works
- Liner size allows for
localized replacement in high wear areas
- Reduced downtime & reduced
maintenance costs
|
 |
 |
 |
|
|
|
|
Armorite 700
Grizzly Screen Cap Wear Liners |
Armorite
700
Grizzly Screen Cap Wear Liners |
|
Armorite Grizzly Screens
will reduce wear on and increase the life of a crusher. By
removing fines upstream of the crusher as well as spreading
material so it is distributed over the width of the crusher, the
crusher wears evenly and the life is greatly extended. |
- Ideal for aggregates, coal &
mining
- Reduces wear on crushers
- Extends life of crusher
- Low maintenance
- Simple rugged designs
|
|
 |
 |
|
|
|
|
Return
to Main Manufactured Products Page |
|
