Primary Belt Cleaners

We generally recommend multiple conveyor belt cleaners be installed to provide effective cleaning on a conveyor system.

Installed at a positive angle, these primary belt cleaners would be mounted directly against the head pulley below the normal trajectory path of the material.

Secondary Belt Cleaners

Installed after the point where the belt leaves the head (discharge) pulley and or anywhere on the return side of the belt where it can be cleaned and maintained effectively.

We have set high standards to help plants minimize problems associated with material carry-back on conveyors.

Our guidelines for effective belt cleaners are:

  • Design for optimum clean with the least amout of pressure.
  • Position the blade out of the main flow of the material
  • If possible, install the belt cleaners in the main chute or an area that will be easily cleaned and maintained
  • Primary blades should be no more than the width of the material being converted
  • Engineered and designed to handle "worst case" conditions
    • Quick and simple replacement blade change
    • Tensioner to maintain tension throughout the life of the blade

ASGCO Primary Conveyor Belt Cleaners

Primary belt cleaners or Pre-Cleaners are an essential part of any conveyor system. Belt cleaners help remove bulk material product carry back and prevent it from falling off at various points of the conveyor along the return side of the belt causing various housekeeping and conveyor belt maintenance problems. Carry back can lead to:

  • Excessive buildup and wear on conveyor belt idlers and pulleys
  • Conveyor belt misalignment due to the artificial crown created by the carry back
  • Accumulation of material falling off conveyor belt idlers and structure to the ground or on buildings, vehicles or even people
  • Negative and unsafe work environment