PROVIDES POWERFUL LOAD SUPPORT

Design Features
  • Increase Belt Life – by eliminating the gaps, scalloping and pinch points between the belt and the skirt liners which can cut and gouge the belt, are eliminated.
  • Seals the Transfer Point – by supporting the belt edge on a flat surface that allows the skirting to work more effectively for an effective seal.
  • Robust Designed – steel frames and 1” (25mm) thick UHWM slider bars provide excellent wear life.
  • Engineered and Designed – beds can be made into 4′ (1200mm), 5′ (1500mm), 6’ (1800mm) or 10′ (3000mm) lengths.

    • Any troughing angle.
    • Number of frames will be determined by each application.

ELIMINATE SPILLAGE AND PROVIDE EFFECTIVE LOAD SUPPORT

Robust Design – using steel frames and 1” thick UHMW slider bars to provide excellent wear life.

Impact Bars – Cushioned with rubber to absorbs impact.

Available– Impact Slide-N-Roll and 3 Roll CEMA F Impact Slide-N-Roll Bed

 

Gallery

 

Product Specifications

Maximum Belt Speed – 800 fpm (4.0 m/sec)

Applications – Aggregate, Sand & Gravel, Redi-Mix and Asphalt, Cement, Wood Processing, Recycling

Replacement Parts – Center Idler Rolls, Low Profile Frame (1” thick, 4” wide) and S&R Low Profile Frame.

Impact Bars – Length 2”, 4” or 5”

Trough Angle – available in 20°, 35° and 45°

Part Numbers

Slide-N-Roll™ – 4 Ft. Long Bed (No Center Bars) 2 Supports – 20,35,45

Part Number No.of Bars Belt Width in. Belt Width mm. Weight Lbs
M-S&RLD-24-4-48-2-(XX) 4 24 600 179
M-S&RLD-30-4-48-2-(XX) 4 30 750 205
M-S&RLD-36-6-48-2-(XX) 6 36 900 272
M-S&RLD-42-6-48-2-(XX) 6 42 1050 305
M-S&RLD-48-6-48-2-(XX) 6 48 1200 347
M-S&RLD-54-8-48-2-(XX) 8 54 1350 389
M-S&RLD-60-8-48-2-(XX) 8 60 1500 431
M-S&RLD-72-10-48-2-(XX) 10 72 1800 472

Part Numbers

Slide-N-Roll™ – 5 Ft. Long Bed (No Center Bars) 3 Supports – 20,35,45

Part Number No. of Bars Belt Width in. Belt Width mm. Weight Lbs
M-S&RLD-24-4-60-3-(XX) 4 24 600 252
M-S&RLD-30-4-60-3-(XX) 4 30 750 305
M-S&RLD-36-6-60-3-(XX) 6 36 900 381
M-S&RLD-42-6-60-3-(XX) 6 42 1050 436
M-S&RLD-48-6-60-3-(XX) 6 48 1200 490
M-S&RLD-54-8-60-3-(XX) 8 54 1350 805
M-S&RLD-60-8-60-3-(XX) 8 60 1500 1120
M-S&RLD-72-10-60-3-(XX) 10 72 1800 1352
Top
Skip to content