Motors

WorldWide Electric stocks its own industry leading brand of products and is also the exclusive domestic distribution arm of Hyundai Heavy Industries – low voltage motors and drives. The combination of Hyundai and WorldWide creates one of the most complete lines of motors, speed reducers, controls and drives available in the marketplace.

WORLDWIDE PROVIDES CUSTOMERS WITH THE BEST PRODUCTS, COMPETITIVE PRICES AND SUPERIOR CUSTOMER SERVICE.

RIGID BASE MOTORS

Premium Efficient and Severe Duty Motors
Features:

  • 1-250 HP – 3600, 1800 and 1200 RPM
  • Single voltage, 460 vol t
  • TEFC enclosure, Rigid base
  • Dual rated service factor 1.15 for 40°C / 1.0 for 65°C
  • Class F insulation with Class N varnish
  • Full compliance with IEEE-841, version 2009
  • Meets or exceeds EISA 2007 requirements defined in NEMA MG-1 table 12-12
  • Parker Hannifan ProTech IP66 labyrinth seals on both drive-end
  • and opposite drive-end bearings
  • CSA Certified for Class I, Division 2, Groups A, B, C, D
  • Inverter duty, 10:1 CT / 1000:1 VT
  • Class B temperature rise

ROCK CRUSHER MOTORS

Advanced Design Rock Crusher Motors
Features:

  • 100 HP – 600 HP; 1800 and 1200 RPM
  • 208-230/460 volt (100-200 HP)
  • 460 volt (250-600 HP)
  • TEFC enclosure
  • 1.15 SF
  • Class F insulation
  • Rigid base
  • Premium efficiency (100-200 HP)
  • EISA-Compliant – high efficiency (250-600 HP)
  • Inverter ready, 4:1 CT / 10:1 VT (100-200 HP)
  • Suitable for 50 hz operation with 1.0 SF (100-150 HP)

 


ADVANCED DESIGN SOFT STARTS

Advanced Design Heavy Duty Soft Starts
Features:

  • Three wire in, three wire out installation
  • Service Entrance Rated
  • Integral bypass contractors are standard on all sizes
  • Over current capacity: 500% for 60 seconds
  • Real-time thermal modeling and dynamic thermal register continuously calculates motor operating temperature even when your motor is not running
  • Phase loss protection based on current and voltage
  • Separate across the line overload protection
  • Load loss trip (under current) with trip delay
  • Pre-start checks for shorted load prior to each star t
  • Two programmable overload trip curves allow for the thermal capacity required to start the load while providing more closely matched overload protection during the run time
  • PTC thermistor input for use on motors with embedded PTC temperature sensors
  • Current imbalance trip and biasing of the thermal register

 

 

Literature Downloads

Top