Chromium Carbide Overlay (CCO) Wear Plate

Back

Moderate Abrasion Resistant Wear Plate

ASGCO’s® Chromium Carbide Overlay (CCO) Wear Plate is an extra hard clad plate with additives that gives even higher abrasion resistance in high stress applications with moderate to low impact conditions.

 
Features & Benefits
  • Cost effective solution when compared to traditional abrasion-resistant steelsChromium Carbid_layers_web
  • Recommended for resistance to wear by abrasion, fretting, cavitation, and
    particle erosion in high temperature applications (up to 1100°F).
  • Ideal for mild to moderate impact abrasion resistance.
  • Low maintenance cost and easy installation.
  • The overlay surface of CCO plate will consist of a series of beads with numerous
    hairline cracks in them. These properly spaced crosscheck cracks are a natural
    phenomenon and are beneficial to the material. The cracks propagate through the
    overlay and end at the fusion line.
 
Application Specifications
  • Cutting – Plasma burning, air arc, abrasive saw or water jet.
  • Welding – Our CCO overlay plate can be joined by welding the substrate to substrate using 309 weld wire/rod.
  • Bending – Using a press brake, forming should be perpendicular to the weld pass direction.
    Plate rolling should be performed in the directions of the overlay beads.
 
Technical Specifications & Chemical CompositionChromium Carbid_Chemical Composition_ web
  • Hardness ranges from 58-62 HRC based on weld thickness
  • Superior wear resistance
  • Optimum solution for most industrial applications

Chromium Carbid_chart_ web