1.800.344.4000
Menu
ASGCO Products

Tru-Trainer® Dual V-Return Conveyor Belt Tracking Idler

Accommodates Excessive Force with V-Return Idler Conveyors

The Tru-Trainer Dual V-Return was developed to accommodate the excessive forces encountered with V-Return idler conveyors, systems and structures.

Tru-Trainer® Dual V-Return Idler

Tru-Trainer® Dual V-Return Conveyor Belt Tracking Idler

Accommodates Excessive Force with V-Return Idler Conveyors

The Tru-Trainer Dual V-Return was developed to accommodate the excessive forces encountered with V-Return idler conveyors, systems and structures.

ACCOMODATES EXCESSIVE FORCE WITH V-RETURN IDLER CONVEYORS

Design Features
  • Two Separate Tapered Rolls – are mounted into the pivot mechanism and can be individually replaced as wear occurs
  • Designed for High Speed/PIW Conveyors – to operate and last in severe conditions, wet and dry, and aggressive mining conditions. Conveyor belt speeds that exceed 800 fpm and/or greater than 1500 PIW.
  • Accommodates Excessive Force – encountered with wide belts and heavy loads.
  • Enhanced Sealing/Bearing System – needle thrust and tapered roller bearings and enhanced sealing system for the most aggressive mining conditions.
  • Individual Rollers for Easy Replacement – separate tapered rolls are mounted onto the pivot mechanism, which can be individually replaced as wear occurs.

Tru-Trainer® Dual V-Return Idler

MOST RELIABLE AND RE-ACTIVE BELT TRACKING IDLERS!

The Tru-Trainer® series of conveyor belt tracking idlers are a patented design that offers the most reliable and re-active belt tracking idlers available today.

  • Belt Width 42” – 84”
  • Idlers can be mounted on the topside or clean side of the conveyor belt.
  • Available in Urethane (Mine Duty), heavy duty rolls 3/4″ polyurethane.

 

 

[/fp-columns]

PRODUCT SPECIFICATIONS

Application – Aggregate, Cement, Mineral (Phosphate, Potash, Salt) Mining, Underground Mining, Coal Fired Power Plant, Hard Rock Mining, Metals (Copper/Gold) Mining, Steel Mill, Iron Ore, Bulk Shipping Terminals

Return Side Trainer

FLAT RETURN AND DUAL RETURN CONFIGURATIONS
TRU-TRAINER APPLICATION GUIDE
Selection criteria Flat Return Standard Flat Return Heavy Duty Dual Return Standard Duty Dual Return Heavy Duty Dual Return EXHD
Belt construction Rubber / fabric Rubber / fabric Rubber / fabric / steel cord Rubber / fabric / steel cord Rubber / fabric / steel cord
Belt width 450–1,200 mm 18–48 in. 1,350–1,650 mm 54–66 in. 900–2,400 mm 36–96 in. 1,200–2,400 mm 48–96 in. 1,500–2,400 mm 60–96 in.
Belt speed 0–3 m/s 0–600 FPM 2–4 m/s 390–790 FPM 0–4 m/s 0–790 FPM 3.5–5 m/s 690–985 FPM 5–10 m/s 985–1,950 FPM
Belt thickness Less than 25.4 mm Less than 1 in. Less than 25.4 mm Less than 1 in. Less than 25.4 mm Less than 1 in. 25–30 mm 1–1.25 in. More than 25.4 mm More than 1 in.

Part Numbers

Tru-Trainer® Dual V-Return

Part Number Belt Width in. Belt Width mm. Weight lbs
ASG-TTVR-105-1 42 1050 300
ASG-TTVR-120-1 48 1200 304
ASG-TTVR-135-1 54 1350 309
ASG-TTVR-150-1 60 1500 348
ASG-TTVR-165-1 66 1650 368
ASG-TTVR-180-1 72 1800 419
ASG-TTVR-210-1 84 2100 521
Top
Skip to content