MSHA approved for mine use – meets all requirements for flame-resistant solid products taken into mines. Acceptance Marking No. MSHA IC -174/2
Increase Productivity – by delivering increased traction between the conveyor belt and pulley, allows for lower belt tension than with rubber lagging.
Improved Conveyor Belt Tracking – due to the Arrowhead patterns self-cleaning ability, which reduces the material build-up and thereby eliminates the major source of conveyor belt misalignment.
Bonding Strength – that is superior to others, due to 3mm of our neoprene compound vulcanized into the bottom-side of the lagging.
Superior Wear – ability in abrasive or highly wet or dry applications as seen in below ground and above ground mining.
Easy Installation – can be done in place, on the plant site, at your local distributor or at the pulley manufacturer. Each strip is 10” (250mm) wide x pulley face (see chart).
Tile – fully enclosed by rubber with rounded corners to allow for better adhesion between the rubber and the tile.
Available – in 5/8”and 1” thicknesses in both SBR and MSHA grade rubber compounds.